How To Tune A Sound System
How to tune a sound system. To learn more about how its done we arranged a meeting with Morten Hermansen our Senior Sound Tuner here at Dynaudio to talk about how he does it and how technology has changed in-car audio. Tune using a song that has deep bass tones. Follow these simple steps below to tune your amplified UTV system.
Note where that setting is. Read how we sound tune the in-car audio system individually for each car down to subs environments and surfaces. The first step on my sound system tuning checklist is always Console Check aka output verification.
Before you start tuning your subwoofer there are a couple of steps that you should follow to ensure a smooth and optimal tuning process. Yes but be careful here. All the leading producers sound engineers and artists use and install this in their system for adjustment necessity and tuning the audios properly.
Additional tools such as screwdrivers wire strippers etc. High-end car stereos not only have these basic tuning adjustments but they also have more advanced sound-enhancing controls designed to take car audio listening to the next level. EQ is so much more than the Rock preset in your Spotify app.
Volume controls the loudness of the output and gain controls the tone. Again adjust the left-to-right balance to your satisfaction. Gain is not the same thing as volume and many people assume it is.
Think of tuning as setting the safety boundaries for your speakers. How to install Audio tuner Software. Download the suitable software for your operating system.
If your amp has a non-adjustable crossover try moving the subwoofer. Settings are flat 2 Turn off all speakers except left front 3 Make sure you have a source for quality pink noise CD preferred 4 Set the RTA microphone as close to the listening position as possible 5 Play pink noise and set dB level to approximately 85 90dB 6 Begin to smooth out eq.
If the bass sounds like its coming from behind you lower the sub amps crossover point to de-localize the bass.
On it there are perpetual download links for a small investment on this topic with unlimited downloads for a year. If adding more of a particular frequency makes the music sound worse turn that frequency down until the music sounds lacking in that frequency range. All the leading producers sound engineers and artists use and install this in their system for adjustment necessity and tuning the audios properly. The first thing you need to do if you want to get high-quality sound is to adjust the gain control. Start by testing the system with a few high-quality tracks that you know really well. The fundamentals are the same for all our amplified systems. Have a seat in your ideal move watching position. Read how we sound tune the in-car audio system individually for each car down to subs environments and surfaces. Even if its two speakers and a mixer if you know its ins and outs you will be able to milk the absolute best sound from itat the worst you can mitigate unexpected complications in a live setting.
Again adjust the left-to-right balance to your satisfaction. Cue up some test tones and set the volume on your system to a comfortable level. Gain is not the same thing as volume and many people assume it is. Thus superior sound quality is a must. Now adjust the turn wheel on the meter so that the needle is. Note where that setting is. The easiest way to remember what gain is is to think of it as tone.
Post a Comment for "How To Tune A Sound System"